Evinrude E-TEC Boat Propellers.
Evinrude-Parts Outboard Wizard
Certified OMC-BRP Evinrude Johnson ETec Dealer & Service Station

Email: REQUEST PARTS  or  FREE TECHNICAL HELP
Marine Shop/Orders/Service:  (631) 991-4491   Technical Help:  (631) 514-1525

305 E. Montauk Hwy. Lindenhurst, NY 11757
Lindenhurst Outboard Service Inc.

We ship worldwide.

Evinrude-Parts Catalog: ETec Boat Propellers.
Selecting an OMC Propeller for Optimal Performance:   Why is the correct propeller selection so important?

  • Better Gas Mileage: Engines max RPM set at engine peak HP.
  • Top End Speed: Prop set at max RPM.
  • Best Cruising: Staying on plane at lower RPM.
  • Maximum Performance: Adjust pitch to achieve your engine RPM at peak HP. For maximum performance, top speed and better acceleration, a stainless steel propeller is usually required. (Most pleasure boats are factory equipped with aluminum propellers, which are less expensive).
IMPORTANT FACTS:
Choosing the correct pitch and number of blades will allow your engine to operate within the RPM range recommended by the manufacturer.
READ more...3 Blade vs. 4 Blade, Size Diameter x Pitch, Material,Recommended RPM's, and Performance...

Read Entire Article- More Propeller Selection Information


Evinrude ETEC
Propeller Part List
GENUINE Evinrude BRP OMC Parts at 10-50 % off Retail Prices -
Full line of genuine Evinrude E-Tec parts in stock, including propellers, (viper, renagade, sst, cyclone props),
fuel pump, powerhead, gearcase, carburetor, lower unit, water pump, Johnson - Evinrude manuals...

Evinrude Johnson E-Tec
OMC BRP Props
Stainless Steel Propellers:

RH # 390831 * 15-1/2" x 14" SST. Stainless Steel Prop - Evinrude BRP OMC List = $ 481.99. Obsolete - Call for availability.
RH # 174926  15" x 15" LH # 174927 SST. Stainless Steel Prop - Evinrude BRP OMC List =  $ 481.99. .
RH # 389925 * 15" x 16"  LH # 174927 SST. Stainless Steel Prop - Evinrude BRP OMC List = $ 481.99.
P/N 389925 is Obsolete, call to check availability.
RH # 176615 14 3/4" x 17"  LH # 176616 SST. Stainless Steel Prop - Evinrude BRP OMC List = $ 481.99.
RH # 176617 14 3/4" x 19"  LH # 176618 SST. Stainless Steel Prop - Evinrude BRP OMC List = $ 481.99.
Note: P/N 176617 superceded by Viper # 763918.
RH # 176619 14 3/4" x 21"  LH # 176620 SST. Stainless Steel Prop - Evinrude BRP OMC List = $ 481.99.

VIPER Propellers:
RH # 176626 14 3/4" x 17"  LH # 176629  VIPER Prop - Evinrude BRP OMC List = $ 481.99.
Note: See also P/N 176615 and P/N 176616.
RH # 176626 14 3/4" x 19"  LH # 176630  VIPER Prop - Evinrude BRP OMC List = $ 481.99.
RH # 176628 14 3/4" x 19"  LH # 176902  VIPER Prop - Evinrude BRP OMC List = $ 481.99.

Cyclone TBX:
RH # 177230 14 1/2" x 17"  LH # 177230 Cyclone TBX. Stainless Steel Prop   - Evinrude BRP OMC List = $ 597.55
RH # 177232 14 1/4" x 19"  LH # 177233 Cyclone TBX. Stainless Steel Prop - Evinrude BRP OMC List = $ 597.55
RH # 176234 14 1/8" x 21"  LH # 176235 Cyclone TBX. Stainless Steel Prop - Evinrude BRP OMC List = $ 597.55
RH # 176236 14 1/8" x 23"  LH # 176237 Cyclone TBX. Stainless Steel Prop - Evinrude BRP OMC List = $ 597.55

Raker II - Right Hand TBX Stainless Steel - For Bass and High Performance Boats, V4 & V6:
(V6 Raker II 22, 24, 26, 28 use the TBX hub system).

# 394753 14.5" x 20" * Stainless Steel RAKER. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter, Runabouts - Speeds over 45 mph. - Evinrude BRP OMC List =  $ 541.93. * Limited Availability.
# 177264 14.5" x 22" Stainless Steel RAKER II RH TBX. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter, Runabouts - Speeds over 45 mph. - Evinrude BRP OMC List =  $ 541.93. * Supercedes P/N # 3947754.
# 394754 14.5" x 22" * Stainless Steel RAKER. Evinrude BRP OMC List =  $ 541.93.
# 177265 * 14.5" x 24" Stainless Steel RAKER II RH TBX. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter - Speeds over 55 mph. - Evinrude BRP OMC List =  $ 541.93. * Supercedes P/N # 394755.
# 3855146 Raker 24" V6  (RH) for SX Cobra. Evinrude BRP OMC List = $ 406.58
# 177266 * 14.5" x 26" Stainless Steel RAKER II RH TBX. For V6  Cobra, Stern Drive..., For High Performance, HP Bow Lifter - Speeds over 60 mph. - Evinrude BRP OMC List =  $ 541.93.   * Supercedes P/N # 177212.
# 177267 * 14.5" x 28" Stainless Steel RAKER II RH TBX. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter - Speeds over 65 mph. - Evinrude BRP OMC List =  $ 541.93. * Supercedes P/N # 177214 and # 177009.
# 177010  14.5" x 30" Stainless Steel RAKER II RH. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter - Speeds over 70 mph. - Evinrude BRP OMC List =  $ 541.93.
# 177242 * 14.5" x 30" Stainless Steel RAKER II RH. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter - Speeds over 70 mph. - Evinrude BRP OMC List =  $ 541.93. * Obsolete Part Number. See also Raker P/N # 177010.

# 394758 Old P/N # 763953 13.5" x 18" Stainless Steel RAKER . For Carbureted and Direct Injection E-Tec Models 75-140 hp, OMC Cobra and OMC Stern Drive Runabouts, Bass Boat and High Performance Boats. Evinrude BRP List 2007 = $ 516.99.
# 394759 13.5" x 20" Stainless Steel RAKER . For V4  60-150 HP, High Performance Bow Lifter, Bass Boat or High Performance Runabouts. Evinrude BRP List 2007 = $ 516.99.
# 394760 13.5" x 22" Stainless Steel RAKER . For V4  60-150 HP, High Performance Bow Lifter, Bass Boat or High Performance Runabouts, Carbureted and Direct Injection E-TEC Models. Evinrude BRP List 2007 = $ 516.99.
# 394761 13.5" x 24" Stainless Steel RAKER . For V4  60-150 HP, High Performance Bow Lifter, Bass Boat or High Performance Runabouts, Carbureted and Direct Injection E-TEC Models. Evinrude BRP List 2007 = $ 516.99.
View Evinrude BRP Raker Propeller Chart.

V4 and E-Tec 40-130 hp Raker props also located here: Sizes 13.5 x 18, 13.5 x 20, 13.5 x 22, 13.5 x 24. View V4 Page.

Renegade Bass:
V4 & V6 engines. 4 Blade Design. Ideal for Bass Tournament style boats. Superior home shot. Reduced steering torque.  Smooth, powerful and fast!  Renegade Bass TBX:  The new TBX prop hub system technology. Prob hub kit included with props labeled TBX. Adds a new level of durability and reliability to the Raker II, Bass, Renegade and Cyclone Propellers. Cushions shock loads to protect the lower unit drive train.

# 177128 13.5" x 23" Renegade Bass TBX For...- Evinrude BRP OMC List = $ 660.25.
# 177129 13.5" x 25" Renegade Bass TBX For...- Evinrude BRP OMC List = $ 660.25.
# 177130 13.5" x 27" Renegade Bass TBX For...- Evinrude BRP OMC List = $ 660.25

75 to 140 HP Carbureted and Direct Injection E-TEC:
(Includes Diameter Size of 13.2 to 14" and Pitch Size of 9" to 24").

# 763300 14" x 9" Aluminum Prop -  For barges, Houseboats. Evinrude BRP OMC List = $ 133.65. 
# 177201 13 7/8" x 8/9" SST. Hydrus RH Prop. For Pontoon, High Thrust boats. Evinrude BRP OMC List = $ 176.99
# 763301 14" x 11" Aluminum Prop -  For barges, houseboats. Evinrude BRP OMC List = $ 133.65. 
# 177202 13 7/8" x 11" SST. Hydrus RH Prop. -  Evinrude BRP OMC List = $ 176.99
# 763302 13 3/4" x 13" Aluminum Prop -  Evinrude BRP OMC List = $ 133.65
# 177203 13 7/8" x 13" SST. Hydrus RH Prop. - Evinrude BRP OMC List = $ 176.99
# 392261 13 3/4" x 13" SST. Stainless Steel Prop, cupped blade.  Evinrude BRP OMC List = $ 429.99.
# 763466 13 1/2" x 15" Aluminum Prop -- For Runabouts, 15 -18' boats. Evinrude BRP OMC List = $ 133.65
# 176571 13 3/4" x 15" SST. Stainless Steel Prop, double cup - swept blade.  Evinrude BRP OMC List = $ 429.99.
# 177258 13 7/8" x 15" VIPER Polished Stainless Steel PropEvinrude BRP OMC List = $ 432.99. See P/N 763299.
# 763463 13 1/4" x 17" Aluminum Prop - Evinrude BRP OMC List = $ 133.65
# 176572 13 7/8" x 17" SST. Stainless Steel Prop, Replaced by VIPER P/N 763930.
# 177259 13 7/8" x 17" VIPER Polished Stainless Steel PropEvinrude BRP OMC List = $ 432.99. Replaced by VIPER P/N 763930.  List Price = $ 432.99.
# 763463 13 1/4" x 17" Aluminum Prop - Evinrude BRP OMC List = $ 133.65

Recommended for 60-70 hp 4 Stroke, 60-115 hp 3 cyl & V4, 40-90 hp E-TEC:

Aluminum:
# 177147 14" x 9" Aluminum Prop -- For Barges 60-140 HP, 3 Cyl and v4 thru 115 HP. Same as P/N 383160.
# 177148 14" x 11" Aluminum Prop -- For V4, 3 Cyl 60-140 HP, 4 Stroke, 40-90 E-Tec...Same as P/N 382761 and 763301.
# 177149 14" x 13" Aluminum Prop -- (Same as P/N 391668 and 763302). For V4  60-115 HP - 3 Cyl, 4 Stroke, 40-90 HP E-TEC, Large Cruisers-Planning. 85-140 HP.
# 177151 13.75" x 15" Aluminum Prop -- (Same as P/N 763466, 177034, 391198). Non Swept Blade Design. For V-4 60-140 HP,  22-26 foot Cruiser boats.
# 177131 14" x 17" Aluminum Prop -- (Same as P/N 176214 and 763463). For V-4 60-140 HP,18-21 Runabouts.
# 177139 14" x 19" Aluminum Prop -- (Also See P/N 763468). For V-4 60-140 HP,For Cruisers, Runabouts.
# 177140 14" x 21" Aluminum Prop --For High Speed and High Performance boats.
# 390895 12 3/4" x 23" Aluminum Prop --For High Speed and High Performance boats. Obsolete Part - Call shop for availability.
# 177201 13 7/8" x 8/9 RH" SST. Hydrus Prop. --  3 blade, high thrust prop, for Pontoon and Work Boats...
# 177202 13 7/8" x 11 RH" SST. Hydrus Prop. --  3 blade for Pontoon and High Thrust.
# 177203 13 7/8" x 13 RH" SST. Hydrus Prop. --  3 blade for Pontoon and High Thrust.
More propeller part numbers and sizes available. Contact The Outboard Wizard. (631) 991-4491. EMAIL.

SST - Stainless Steel:
(For 60-70 hp 4 Stroke, 60-115 hp 3 cyl & V4, 40-90 hp E-TEC):

# 175294 . 13.75" x 11" SST. Stainless Steel II  Prop. -- (See also Hydrus # 177202). Triple Cup. For  V-4 60-150 HP, Pontoon Boat... See also # 763300 and # 177202.
# 175013 * 13.75" x 13" SST. Stainless Steel II  Prop. --* Superceded by P/N  # 177203. (Alum 13.88 x 13). Triple Cup. For  V-4 60-150 HP, Pontoon Boat. (Without triple cup blade, See P/N 392261). BRP List (2006) = $179.99. See also # 763300 and # 177202.
# 176571 13 7/8" x 15" Stainless Steel II  Prop. -- (Same as P/N 389949). Swept Blade Design. For V-4 60-140 HP, 22-26 foot Cruiser boats...BRP List (2006) = $ 429.99.
# 177258 Old # 177042  13-7/8" x 15" Viper Prop --BRP List (2006) = $ 432.99.
# 177259 Old # 176623  13-7/8" x 17" Viper Prop --BRP List (2006) = $ 432.99.
# 176572  13.75" x 17"  Stainless Steel II  Prop. -- Swept Blade. For V-4 60-140 HP,18-21 foot Runabout boats.
BRP List (2006) = $ 429.99.
# 394753 14.5" x 20" * Stainless Steel RAKER. For V6  Cobra, Stern Drive..., For High Performance Bow Lifter, Runabouts - Speeds over 45 mph. - Evinrude BRP OMC List =  $ 541.93. * Limited Availability.
# 763931 # 176624  13-7/8" x 19" Viper Prop -- Swept Blade. For 16-19' Runabouts. BRP List (2006) = 432.99 $ .
# 394759 13.5" x 20" Stainless Steel RAKER . For V4  60-150 HP, High Performance Bow Lifter, Bass Boat or High Performance Runabouts. Evinrude BRP List 2007 = $ 516.99.
# 177261 # 176625  13-7/8" x 21" Viper Prop -- Swept Blade. For 15-18' Light Runabouts.   BRP List (2006) = 432.99 $ .
# 394760 13.5" x 22" Stainless Steel RAKER . For V4  60-150 HP, High Performance Bow Lifter, Bass Boat or High Performance Runabouts, Carbureted and Direct Injection E-TEC Models. Evinrude BRP List 2007 = $ 516.99.
# 394761 13.5" x 24" Stainless Steel RAKER . For V4  60-150 HP, High Performance Bow Lifter, Bass Boat or High Performance Runabouts, Carbureted and Direct Injection E-TEC Models. Evinrude BRP List 2007 = $ 516.99.

Copyright by The Outboard Wizard - Lindenhurst Outboard Inc. www.evinrude-parts.com www.theoutboardwizard.com, List may not be copied for distribution without permission.
Prices subject to change at anytime due to change in manufacturer list price.

View V4 Propeller Chart
View 4 STROKE and SX COBRA PROPS.


View V4  Mid-Size Engine Props Here.
View Small Engine - Below 50 hp, 2 - 3 Cyl, 2 Cycle, 2 Stroke Here.
View Large Engine Props - 140 to 300 hp Here.
View ALL Aluminum Propellers Here.
View ALL Raker Propellers Here.

We have the new "Rebel" Prop in stock!
Recommended for 60 and 90-degree V6 Evinrude Johnson and E-TEC engines -
For V6 V8, Cobra, and Stern Drive engines:

The new Rebel propellers, designed and engineered to deliver even greater fuel economy plus improved midrange and top-end performance. Great in offshore, large runabouts and even large pontoon boat applications for maximum boat and engine performance.  3-blade propellers, designed with a large diameter and efficient blade contour to provide faster speeds at lower rpm, improved fuel economy for more miles per gallon, increased top end speed, and a longer cruise range. The Rebel propellers are made of highly polished stainless steel with right-hand and left-hand rotation available.
Rebel Prop: Evinrude BRP List Price 2007= $ 515.45.

RH P/N # 763658 - LH # 763659   15 3/4" x 15"  REBEL. 
RH P/N # 763568 - LH # 763569   15 1/2" x 17"  REBEL. 
RH P/N # 763570 - LH # 763571   15.3" x 19"     REBEL. 
RH P/N # 763572 - LH # 763573   15" x 21"        REBEL. 
RH P/N # 763574 - LH # 763575   14 3/4" x 23" REBEL. 
RH P/N # 763576 - LH # 763577   14 1/2" x 25" REBEL. 
5/12/2007 Evinrude E-Tec Outboard Propellers.
ALUMINUM - STAINLESS STEEL - RENEGADE BASS - CYCLONE - VIPER - RAKER - REBEL -ROGUE.
Propellers - For all outboard engines, including:
Evinrude - Johnson - E-Tec - Cobra - Mercury -  Mercruiser - Honda - Tohatsu -
Mariner - Volvo Stern Drives - Force - Nissan - Suzuki - And More.
EVINRUDE E-TEC PROPELLER CHART:

PROPELLER PARTS  LIST:   Evinrude E-TEC OMC BRP PROPS -
Aluminum Outboard Propellers - Genuine Evinrude Johnson E-Tec.
Aluminum
SST Outboard Boat Propeller - Evinrude BRP.
Viper Outboard Boat Propeller - Evinrude BRP.
Rebel Polished Stainless Steel Outboard Boat Propeller - Evinrude BRP.
Rebel
Renegade Bass Outboard Boat Propeller - Evinrude BRP.
Raker Outboard Boat Propellers - Evinrude BRP.
Evinrude-Parts
Technical Help:  (631) 514-1525                                                                                                                         Order Parts:      (631) 991-4491
       
E-TEC  PROPELLERS
10 to 25 % Off New Genuine ETEC BRP Props!
EMAIL BRP
PARTS REQUEST
REQUEST FREE
TECHNICAL HELP
OMC BRP PARTS + ACCESSORIES
                                                          Genuine Evinrude parts at discount prices since 1979.  Copyright 2000 - 2012  All Rights Reserved.  NY -  FL. 
Aluminum Propellers:
Includes 2 Cylinder, Two Cylinder Large Gearcase  and 3 Cylinder, and
E-Tec 40-60 hp, and E-Tec 75 hp-140 hp Carbureted and Direct Injection Models:

Evinrude BRP List (2007) = $ 133.65
Click on part number link to order online.
# 763300 14" x 9"  Supercedes PN 383160 and 177147.  - For barges.
# 763301 14" x 11"   Supercedes PN 382761 and 177148.  - For barges + houseboats.
# 763302 13.75" x 13"  Supercedes PN 177149. - For large cruisers and planing boats.
# 763466 13.5" x 15"  Supercedes PN 177151 and 391198. - For 22-26 ft. cruisers.
# 763463 13.25" x 17"  Supercedes PN 177131 and 176214. - For 18-21 ft. runabout boats.
# 763464 13.2" x 19"  Supercedes PN 177139 and 176215. - For 17-20 ft. light runabouts.
# 763465 13.2" x 21" - For 15-18 ft. high performance boats.
# 390895  12.75" x 23"  Obsolete Part - Call for availability. - For 15-17 ft. high performance.
- Boat applications listed are general guidelines only.
5/12/07
Scroll down chart to locate your engine size and model.

25" V4 90-130 HP & V6 90-300 HP, V8, and E-Tec